Filter Specifications

1 unit comprises of:
5-stage Reverse Osmosis System
12l storage tank
Faucet
Diy kit
1/4'' tubing
Installation Manual
Full set of filters
24V stainless steel Booster Pump
Our RO Filters come complete with a NSF standard 12 litre water storage tank and all the necessary fittings, installation kit, 1/4'' tubing, installation manual and a long-reach attractive faucet. Our RO Filters are designed for durability and purity. We only use FDA/NSF certified components.
We keep all spares in stock! 1 year limited Warranty!
Features
FDA Approved
Polypropylene Made Flat Cap Housing
NSF post carbon filter
Automatic Shut-off Valve
Special technical designs
Flow Restrictor
Stainless Steel Check Valve
Long Reach attractive faucet
Feed water connector & deliver valve
Drain Saddle Valve
1/4 inch Tubing for System Connection
100% Factory Tested and Sterilized
Ready for Installation!
Flow Diagram Specifications
Production:
50 GPD/225 LPD

Dimensions:
System:
(cm) 37 (W) x 21 (D) x 47 (H)

Tank:
(cm) 28 (W) x 35 (H)

Weight:
12,5 kg

The 5 Stage RO System:
(Stage 1) 5 Micron Sediment Filter:
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Activated Carbon Filter:
It takes out 99% of the chlorine and organic chemicals.
(Stage 3) 1 Micron Spun Sediment Filter:
This 1 micron sediment filter is made of 100% pure polypropylene fibres. High capacity filter removes sediment, dirt and rusts.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that will process up to 50 gallons per day. It removes the following hard water contaminants that may be present in your water: lead, copper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Post Carbon filter:
This carbon post filter improves tastes and enhances the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.

The 6 Stage RO System:
As above with added bacteria filter
With our Reverse Osmosis Water Filter about 98% of all contaminants are removed from your water. So why would you need an extra bacteria filter? The answer is quite simple. While the system is taking care that none of the nasty’s reach your glass, it obviously has to keep them somewhere. When you come to changing your filters you will see what a great job its doing just by looking at the first filter. This is where our bacteria filter comes in. Any bacteria still in the system will be automatically filtered out in the very final stage before the water hits the tap because it’s fitted directly under the tap. Which means you don’t even have to disinfect your system when changing filters!
Our bacteria filter is not dependent on a electricity supply like UV lights and it fits all reverse osmosis units with 3/8” or ¼” tubing. So if you’ve been unfortunate enough to buy your system else where, chances are we can still help you out.